Scytek-electronics VISIONGUARD 6000 Manual de usuario descargar pdf (Pagina 8)

Page 4 - VisionGuard 6000

True Color 2-way Camera Ready Remote Transmitter Description

The VisionGuard 6000 True Color 2-way LCD remote transmitter, is offering increased range

and confirmation of any activated features.

Button 1

Arms the system. Button 1 also locks the doors when the system is in Valet Mode.

Button 2

Disarms the system. Button 2 also unlocks the doors when the system is in Valet

Mode.

Button 3

When Pressed and released momentarily activates the Auxiliary Output 2. When

pressed for 2 seconds Acitvates the Remote Start feature.

Button 1 and 2

When pressed together for 2 seconds Activates the Panic Feature

Button 3 and 4

When pressed together for 2 seconds Activates the Auxiliary 1 output normally

used for trunk release.

Button 4

is the Confirmation button. Quickly pressing button 4 will activate the LCD display’s

backlighting for use in the dark. Pressing button 4 for 2 seconds activates the system’s

confirmation feature which will then display the current status of the system (armed,

disarmed, engine running, etc.).

Adding/Replacing True Color 2-way LCD Transmitters

When adding an optional 2-way LCD transmitter to the system, follow these steps:

1. Turn on the ignition key On, Off, On, Off, On, Off, and back On. (Key On 4 times)

· The siren will chirp 4 times.

2. Press and hold the Override switch for 5 seconds.

· The siren will chirp 4 times.

· The LED will illuminate.

3. Press Button 1 on the first transmitter.

· The siren will chirp once.

Button 1

Button 2

Button 3

Button 4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Scytek-electronics VISIONGUARD 6000 Manual de usuario Pagina 8